Metal Venetian Blinds

Pistachio Metal Venetian Blind

Enlarge

25mm slat widths.
Matt finish venetian blind.
Raise control settings to left or right.

Save 50%

SAVE 50% OFF METAL VENETIAN BLINDS

Order Free Sample

Availability:: In Stock
Delivery:: 7 days (more info)

Description

Specification

How to measure

Specification

Brand	Arena Sun Control Systems
SKU	Bamboo Metal Venetian Blind
Material	Aluminium
Finish	Matt Cream Bamboo
Product Type	Metal Venetian Blind
Control Position	Left or Right
Tilt Control	Wand
Tilt Control Position	Left or Right
Maximum Width (cm)	400
Minimum Width (cm)	25
Maximum Drop (cm)	400
Minimum Drop (cm)	20
Slat / Pleat Size (mm)	25
Ladder Style	Co-ordinating Ladder
Exact or Recess	Exact or Recess
Headrail Dimensions	27mm wide x 19mm deep
Number of Brackets	2
Wall or Ceiling Fix	Wall or ceiling fix
Estimated Delivery	7 working days

Close

Customising a blind to meet your bespoke requirements is quick and easy. Simply enter the dimensions of your blind, and then specify your requirements in step 2.

Step 1 Options

Slat Width

The slat width refers to the width of each individual slat or blade of the blind, choose from the available size options.

Slat size (mm) 25

Width

The width is the measurement taken horizontally from left to right across the area where your blind is to be located.

Width (cm)

Min:25 / Max:400

Drop

The drop is the measurement taken vertically from the top of the blind to the bottom of the blind.

Drop (cm)

Min:20 / Max:400

Please specify your requirements from the options below

Step 2 Options

Exact/Recess

Exact is selected when you require you're blind to be hung on the wall outside of your window recess area, where your blinds will then be made to your exact measurements.
Recess is the internal area where your window is located, select recess when your blind is to be located within this area. There is no need to make any adjustments to your measurements as your blind will be made to fit the recess area perfectly.
Please refer to the how to measure section to ensure you have measured correctly.

Exact/Recess

Raise/Lower

The raise and lower control enables the blind to be pulled up and down, select which side of the blind the raise and lower control should be located.

Raise/Lower

Tilt Control

The tilt control enables you to adjust the angle of the slats varying the amount of light to pass through the blind. Select which side of the blind you wish the tilt control to be located, ensure you choose the most practical side for ease of operation.

Tilt Control