Hornbeam Metal Venetian Blind

Exact/Recess

Exact is selected when you require you're blind to be hung on the wall outside of your window recess area, where your blinds will then be made to your exact measurements.
Recess is the internal area where your window is located, select recess when your blind is to be located within this area. There is no need to make any adjustments to your measurements as your blind will be made to fit the recess area perfectly.
Please refer to the how to measure section to ensure you have measured correctly.

Raise/Lower

The raise and lower control enables the blind to be pulled up and down, select which side of the blind the raise and lower control should be located.

Tilt Control

The tilt control enables you to adjust the angle of the slats varying the amount of light to pass through the blind. Select which side of the blind you wish the tilt control to be located, ensure you choose the most practical side for ease of operation.