Tamara Natural Roller Blind

Exact/Recess

Exact is selected when you require you're blind to be hung on the wall outside of your window recess area, where your blinds will then be made to your exact measurements.
Recess is the internal area where your window is located, select recess when your blind is to be located within this area. There is no need to make any adjustments to your measurements as your blind will be made to fit the recess area perfectly.
Please refer to the how to measure section to ensure you have measured correctly.

Braided

Braid is decorative trim which is used to neaten the bottom edge of the roller blind. If this option is selected a braid will added which coordinates with your selected roller blind fabric.

Control Type

A control type is a decorative feature located centrally on the bottom of the roller blind and can be used for decoration or for raising and lowering the blind.

Control Location

The control side means which end of the blind do you want the opening and closing controls to be located either on the left or right.

Roll Option

The roll option describes how the blind rolls up and can be either standard where the blind rolls down from the front, or reverse where the blind rolls down from behind.