The Integra Mix and Match Curtain pole is available in four colours and supplied as a one piece length of curtain pole only. The curtain rings, brackets, and finials can be purchased separately allowing you to customise your curtain pole to best match your curtain requirements.
The Integra Mix and Match 28mm curtain poles are available in two lengths of 120cm or 180cm, each pole is supplied in one piece but can be joined by purchasing the 28mm Integra Joining Piece (see related items below). Please note, each join will require the support of any of the Integra Options 28mm Brackets (excluding the Passing Bracket). All brackets are sold in singles and are available in the related items section below.
The curtain pole can be easily cut down to a required length at home using a junior hacksaw.
How to purchase for a standard 28mm curtain pole
1. Choose the colour and purchase the necessary amounts pole kits to achieve your desired length of curtain pole (28mm pole joiners can be purchased from the related items section below).
2. Choose your brackets, there are 4 types to choose from depending on your requirements as listed (all are available from the related items section below) –
- Integra Options 28mm Standard Brackets – We recommend these for standard straight run curtains, and supporting joining curtain poles.
- Integra Options 28mm Centre Brackets and End Bay Brackets – These are recommended for use with bay windows in conjunction with the Integra Options 28mm Passing Brackets. The End Bay Brackets and Centre Brackets can also be used for ceiling fix and wall fix as an alternative to the 28mm Standard Brackets. Please note – Centre, Passing, and End Bay Brackets all have shorter projections than the Standard Bracket.
3. Choose your finials (sold in pairs), decorative 28mm finials can be purchased from the related items section.
4. Choose curtain rings if needed (sold in packs of 6, you will need 1 curtain ring
to every 10cms of curtain pole).
