Rolls Neo Ball 28mm 3 Sided Bay Window Curtain Pole (Wall Fix)

The Rolls Neo Ball three sided bay window curtain pole kit offers a practical and stylish solution for hanging a pair of curtains drawing from the sides to the centre of the bay pole.

The Neo bay pole is suitable for all types of curtains with hooks (excluding wave) and supports medium-weight curtains up to 8kg. It’s designed for use with both right-angled and splayed bay windows, offering versatile support for a range of window shapes.

Please note - a 35mm (1 3/8") diameter version of this pole kit is available and suitable for medium to heavy weight curtains up to 10kg, ‘Click Here’ to view.

Complete bay window curtain pole kit 

Supplied complete and ready to fit in four popular colours of stainless steel, spun brass, chrome and black nickel in length options of 300cm (118 1/8”), 360cm (141 3/4”), 400cm (157 1/2") and 480cm (157 1/2”), 540cm (212 5/8") and 600cm (236 1/4").

Choose your preferred colour and length, then refer to the bay diagram in the product images for bay sizes or check the ‘Specification’ tab for detailed product information.

Each kit includes the following -

• 28mm diameter poles - (quantities and lengths are dependent on bay size selected), select required length and see the ‘Specification’ tab.
• 2 x Hand bendable corner joints.
• 3 x Standard cylinder brackets.
• 4 x Passing brackets.
• 2 x Ball finials.
• 6 x Standard curtain rings.
• Passing rings - (quantities are dependent on bay size selected), select required length and see the ‘Specification’ tab.
• All necessary quantities of wall plugs and fixing screws. 

The 28mm (1 1/8") diameter poles can be easily cut down to your exact required length at home to fit each window section using a fine tooth saw.

The corner joints are hand bendable allowing you to bend them to meet the angles of your bay (from straight to 90 degrees). The curtain rings pull easily around the corner bends. When bending ensure that the notches are located on the inside and do not over bend as straightening may distort the profile. Please refer to the fitting Instructions.

Passing brackets are located in the corners of the bay, one before and one after each bend (highlighted in green in the bay diagram in the product images). The supplied passing rings pull easily around the corners, past these support brackets and stop when the rings reach the standard cylinder brackets, which are located at each end and at the centre of the bay pole (highlighted in red in the bay diagram).

Please note - For correct operation, your curtains must be hooked into the top pocket of your curtain heading tape.

• Select your required colour and length and see the ‘Specification' tab for further info.
• Complete curtain pole kit for hanging curtains with rings in a three sided bay window.
• Smooth hand bendable curved corner joints for an easy glide around corners.
• Includes wall fix passing brackets and passing rings for optimum support.
• Poles can be easily cut down to length at home using a fine tooth saw.
• Available in multiple lengths for bays of all sizes.
• Suitable for medium weight curtains up to 8kg.
• Extra brackets, poles, rings and coordinating accessories are available - see the ‘related items’ below.